繁昌窑址附近多种瓷土成分分析

繁昌窑青白瓷胎体配方工艺一直停留在理论推理阶段，尚未有确凿的测试数据和模拟实验加以证实。为深入探究繁昌窑的胎料配方工艺，选取了繁昌窑址附近的多种瓷土样品进行了测试分析，并采用了古代制瓷工艺进行了模拟烧制。主要运用了波长色散X射线荧光光谱法(WDXRF)、红外光谱（FTIR）和X射线衍射（XRD）等光谱分析方法对瓷土成分进行测试；借助同步热分析（TG-DSC）对样品烧造温度进行了探索；通过模拟烧制陶瓷样品，对繁昌窑青白瓷的烧制工艺进行了研究，并对烧制的陶瓷样品进行显微结构分析。研究表明，繁昌窑附近的几种瓷土无论是单独制胎还是添加高岭土混合制胎，其烧成温度皆接近古代繁昌窑青白瓷的烧制温度。繁昌窑附近的瓷土是可以作为制作古代青白瓷的原料之一，但由于其中的铝含量较低，不能单独用来制作青白瓷胎体的原料，繁昌窑青白瓷在制作过程中应添加了其他富铝类原料。该研究对探索古代繁昌青白瓷的生产工艺及其蕴含的科学价值，提升繁昌窑在中国陶瓷工艺技术发展史上的地位等具有重要的学术意义，并可为现代陶瓷产业技术改进提供有益启示。     

Influence of high pressure treatment on rheological and other properties of egg white

Abstract

The paper deals with the influence of high pressure treatment of fresh egg white on its properties and protein composition (individual amino-acids predicted as a function of pressure and time levels). The rheological properties are changed by high pressure from Newtonian to non-Newtonian behaviour, with increasing apparent viscosity as the pressure and time increased. The pH, whipping ability, foam stability, gel strength of heat induced gels after treatment and the whole protein content, were also predicted.

The results showed that the foam stability is increased with increasing pressure and time of processing. The foam volume is also increased with pressure. The pH did not change with pressure or time of processing. Composition of proteins as indicated by individual amino-acids did not exhibit statistically important changes. Gel strength of heat induced gels prepared from previously pressured liquid whites showed no important change of values with pressure or time of treatment. The modulus of elasticity showed a decrease for samples pressured to 400 MPa for 5 up to 15 minutes.     

Resolution enhancement in hydrophobic interaction chromatography via electrostatic interactions

In this work, a new type of hydrophobic stationary phase that provide electrostatic interactions with analytes was developed by bonding β-phenylethylamine as a functional ligand to silica. This stationary phase can separate proteins with similar hydrophobicity that traditional hydrophobic resins cannot. Hen egg white was separated to examine the selectivity. The results show that the introduced electrostatic interactions are an important factor for the resolution enhancement and the new resin could have important applications in separation and purification of biological macromolecules.     

Energy Transfer from the Upper Triplet States of Aromatic Molecules

The energy transfer from the upper triplet states of diphenylamine, naphthalene and triphenylene to toluene and hexene-1 is studed. Two mechanisms of dissipation transferred energy in solvents are discussed.     

单面柱局域共振声子晶体低频带隙特性分析及结构改进研究

基于有限元法对单面柱局域共振声子晶体进行带隙特性分析,研究了结构参数对该类型声子晶体的影响。结果表明:随着散射体高度的增加,单面柱声子晶体的第一完全带隙的起始频率逐渐降低,带宽逐渐增大;随着基板厚度的增大,单面柱声子晶体的起始频率逐渐升高,截止频率先增大后减小。并且在经典单面柱声子晶体的基础上,组合了两种新型的三组元单面柱声子晶体结构:嵌入式单面柱声子晶体(以下简称结构Ⅰ)和粘接式单面柱声子晶体(以下简称结构Ⅱ)。通过对其带隙特性的分析得出:这两种新结构与经典的单面柱声子晶体相比,都具有更低频的带隙,这对于低频减振降噪是非常有利的。本文的结果将对实际的工程应用提供一定的理论指导。     

Reducing Occupational Noise Propagated from Centrifugal Fan through Dissipative Silencers: A Field Study

Acoustic performance of dissipative silencer was evaluated to determine the effectiveness of perforated duct porosity and absorbent material density in reducing occupational noise exposure propagated from centrifugal fan. Design charts were applied to predict noise reduction and length of a dissipative silencer. Dissipative silencers with various punched duct porosity (14%, 30% and 40%) and sound absorbent density (80 Kg/m³, 120 Kg/m³, and 140 Kg/m³) were designed and fabricated. According to ISO9612 and ISO11820, noise level was measured before and after installing all nine test silencers at fixed workstations around the discharge side of a centrifugal fan in a manufacturing plant. On average, the noise level at the discharge side of a fan without silencer was measured to be 93.6 dBA, whereas it was significantly mitigated by 67.4 dBA to 70.1 dBA after installing all silencers. Dynamic insertion loss for a dissipative silencer with 100 cm length was predicted to be 27.9 dB, which was in agreement with experimental ones. Although, there was no significant differences between insertion loss of silencers, the one with 30% porosity and 120 Kg/m³ rock wool density had the highest insertion loss of 26.2 dBA. Dissipative silencers noticeably reduced centrifugal fan noise exposures. Increasing sound absorbent density and duct porosity up to a certain limit could probably be effective in noise reduction of dissipative silencers.     

Controlled quantum teleportation of an unknown single-qutrit state in noisy channels with memory

This paper proposes a three-dimensional(3 D) controlled quantum teleportation scheme for an unknown single-qutrit state. The scheme is first introduced in an ideal environment, and its detailed implementation is described via the transformation of the quantum system. Four types of 3 D-Pauli-like noise corresponding to Weyl operators are created by Kraus operators: trit-flip, t-phase-flip, trit-phase-flip, and t-depolarizing. Then, this scheme is analyzed in terms of four types of noisy channel with memory. For each type of noise, the average fidelity is calculated as a function of memory and noise parameters, which is afterwards compared with classical fidelity. The results demonstrate that for trit-flip and t-depolarizing noises, memory will increase the average fidelity regardless of the noise parameter. However, for t-phase-flip and trit-phaseflip noises, memory may become ineffective in increasing the average fidelity above a certain noise threshold.     

A statistical analysis of power-level-difference-based dual-channel post-filter estimator

By deriving the explicit expression of the probability density function (p.d.f.), this paper presents a statistical analysis of the power-level-difference-based dual-channel post-filter (PLD-DCPF) estimator. The derivation is based on the joint p.d.f. of the auto-spectra of a two-dimensional stationary Gaussian process with mean zero, where the theoretical expression is verified by numerical simulations. Using this theoretical p.d.f. expression, this paper studies the impacts of the correlative parameters on the amount of noise reduction and speech distortion. According to both the theoretical analysis results and the simulation results, four schemes are proposed to improve the performance of the traditional PLD-DCPF estimator.